Vanguard has made identifying your commercial series engine easier than ever with the Vanguard Power Code. With one scan of an easy access QR code, you have your engine model number, operators manual, illustrated parts list, and more at your fingertips. Read or watch the video below to learn more about how to use it and all that it provides. Alternative ways to identify your engine information are also listed.
It's easy! Just navigate to the camera app on your mobile device, position the QR code in your camera's frame, and click the link that appears. Once on the page that pops up, you can navigate throughout and utilize all the resources it provides.
What the Vangaurd Power Code provides you:
Engine Model Number
Operator's Manual
Illustrated Parts List
Dealer Locator
Recommended Maintenance Intervals
Contact Us
The Model, Type and Code numbers, stamped directly into the engine, are used to identify our engines. They can also be stickers that are located of the engine.
Engines used in lawnmower applications usually have these numbers stamped into the blower housing, muffler heat shield or a few inches above the spark plug. Depending on the type of engine shroud used, the engine numbers may be covered. It may be necessary to remove this shroud in order to locate the Model, Type and Code.
Many horizontal shaft, overhead valve engines have these numbers stamped into the OHV rocker cover. However, on certain overhead valve powered generators, the equipment manufacturer installs a decorative chrome rocker cover OVER our cover. If your engine has a decorative cover, it may be necessary to remove it in order to locate the Model, Type and Code.
Please read and abide by any applicable Safety Information contained in your engine Operator's Manual. The material provided above is not intended to replace work performed by a Briggs & Stratton authorized dealer. Terms and Conditions apply to all of the information presented on this website. Always be sure to completely read and understand your engine Operator's Manual.